Configuration; Sensor" Menu, Teaching-In/Deleting Sensors; Time/Date" Menu, Setting The Time And Date - HomeMatic WDC7000 Bedienungsanleitung

4.3

Configuration

The weather station is supplied in a condition where its basic functions are ready for
operation immediately after start-up, with no need for any other settings to be made
(basic functions do not include the moon phase indicator, display of sunrise and
sunset times, date, time or min./max. indicator).
Some configuration settings do need to be made to enable you to use the additional
and time-specific functions.
- Touch "CFG" to open the configuration menu.
- Touch "NEXT" repeatedly to move through the main menu items of the configura-
tion menu. The Appendix contains a menu overview to make it easier for you to
find specific menus.
4.3.1

"SENSOR" menu, teaching-in/deleting sensors

Refer to 3.1
4.3.2

"TIME/DATE" menu, setting the time and date

This setting is only required if DCF-synchronisation has not been performed.
- Select the "TIME/DATE" menu:
NEXT
- Touch "ENTER" and the following appears:
TIME
- Touch "24H" to toggle between a 12-hour and a 24-hour clock display.
- Touch "TIME" and the following appears:
YEAR
- Touch "+" or "-" to set the year.
- Touch "YEAR" and the following appears:
MONTH
- Touch "+" or "-" to set the month.
- Touch "MONTH" and the following appears:
DAY
- Touch "+" or "-" to set the day of the month.
- Touch "DAY" and the following appears:
56
TIME/DATE
24H
ENTER
+ 2006 -
+ 07 -
+ 01 -