In Boiling Water - Pari Sinus Gebrauchsanweisung

Disinfection
After cleaning, disinfect the dismantled nebuliser and accessor-
ies used (except the PARI SINUS tube system). Effective disin-
fection is only possible if the nebuliser has been cleaned.
CAUTION
A damp environment may encourage the growth of bacteria.
Therefore, remove all parts from the pot or disinfector as
soon as disinfection has finished. Dry the parts. The risk of
infection is reduced when the parts are dried completely.

In boiling water

• Place all the individual parts in boiling water for at least
5 minutes.
Use a clean pot and fresh water with reduced calcium
content, if possible.
Plastic will melt if it comes into contact with the hot base of
the pot. Therefore, make sure there is plenty of water in the
pot. This way you will avoid damaging the components.
• You can remove excess water more quickly by shaking all
parts.
– 68 –