Switching Time/Day (T-D) Display; Switching Nominal/Actual Temperature (S-A) - eQ-3 MAX! Wandthermostat+ Bedienungsanleitung

In the display, bars for heating phases are displayed
whenever the set temperature for the period is high-
er than the set reduction temperature.
If you want a room (e.g. the bathroom) to also be heated
during lunchtime the programming could look as follows:
Monday - Sunday:
from 00:00 to 06:00
from 06:00 to 09:00
from 09:00 to 12:00
from 12:00 to 14:00
from 14:00 to 18:00
from 18:00 to 22:00
from 22:00 to 23:59

17.2 Switching time/day (t-d) display

The factory setting will show the time on the display. In the
menu the display can be switched to the date.
• Open the configuration menu by pressing the menu but-
ton for more than 3 seconds.
• Select the "t-d" menu item with the (+) and (-) buttons and
confirm with the OK button.
• Now set the format you want to show on the display
(date and time will switch on the display) with the (+)
and (-) buttons.
• Confirm setting with the OK button.
•
•

17.3 Switching nominal/actual temperature (S-A)

In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
48
15.0°C
23.0°C
17.0°C
19.0°C
17.0°C
21.0°C
15.0°C