Herunterladen Inhalt Inhalt Diese Seite drucken

Telescopic Arm As An Accessory; Assembling The Telescopic Arm; Adjust The Height Of The Telescopic Arm; Adjusting The Working Angle - FLORABEST FGS 3.6 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für FGS 3.6 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 92
Telescopic arm as an
accessory
Ensure that the safety key (
removed before all tasks.
Caution! Device is delivered with-
out a telescopic arm. Alternatively,
a telescopic arm including wheels
can be ordered (see "Spare parts/
accessories").
Assembling the telescopic
arm
Putting the telescopic arm
together:
1. Put both parts of the telescopic
arm (17) together and tighten
the screw.
Make sure that the cable is
not clamped.
Assembling/dismantling
the telescopic arm:
2. Push the device along the guide
rail (18) into the equipment hold-
er (19) of the telescopic arm. It
locks into place audibly.
3. Plug the plug connection (20)
into the charging socket (5) on
the back of the equipment han-
dle (4).
4. To dismantle, release the plug
connection (20). Press the unlock
button on the bottom side of the
equipment holder (19) of the tel-
escopic arm and pull the device
out (see small image).
Adjust the height of the tel-
escopic arm
7) is
Adjust the length of the telescopic
arm for your size with the help of
the adjusting screw (21).

Adjusting the working angle

For a comfortable edge cut, the equipment
holder (19) of the telescopic arm can be
rotated to the right or left (90 °).
Set the desired position by pulling
the release switch (22) and rotating
the equipment holder (19) of the tel-
escopic arm. The equipment holder
locks into the desired position when
the release switch is released.
Switching on and off
(with telescopic arm)
1. Remove the blade guard (
2. Insert the safety key (
3. To switch on, hold the switch
4. To turn it off, release the on/off
Working with the telescopic
arm
Slowly push the device on the wheels
over the floor. By doing so, you will
achieve an even cutting height.
11/14) before switching the de-
vice on.
the device.
lock (23) on the handle of the
telescopic arm and simultaneous-
ly press the on/off switch (24).
Release the switch lock, device
runs at top speed.
switch (24).
GB
7) into
17

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

280350

Inhaltsverzeichnis