Infrared Remote Control - WolfVision VZ-P18 Bedienungsanleitung

Infrared Remote Control

The IR remote control offers a comfortable and very easy way to control basic functions of the
Visualizer.
TELE WIDE
FOCUS SCROLL
PRESET
EXTERN FREEZE
1
POWER
LASER POINTER
Important: Do not stare directly into the laser beam. This is hazardous for your eyes!
ZOOM
Press TELE to zoom in or WIDE to zoom out.
Using the ZOOM keys also switches the auto iris on again.
FOCUS
Press the FOCUS key to perform the one-push Auto Focus function or focus manually by using the +/- keys
(see page 13).
SCROLL (top mirror)
Press the SCROLL key to centre the pick-up area to the working surface. To scroll, please use the +/- keys.
The mirror can also be adjusted by hand.
PRESET (programmable settings)
To recall a preset configuration setting, press the PRESET key quickly.
To capture the current configuration and save it as a preset, press and hold the key for at least 2 seconds.
EXTERN
Toggle between the signals sent to the output ports: either the live camera image or the signal from the
External Input port.
FREEZE
Freezes the current live image. Press again to display the live image (see page 13).
POWER
Toggle between full power and stand-by mode. (see page 20).
11