Infrared Remote Control - WolfVision VZ-C32 Bedienungsanleitung

Infrared Remote Control

Please note that an infrared remote control can only be used up to a certain distance from
the unit. Objects situated between the Visualizer and the infrared remote control, and weak
batteries, interfere with reception.
If the Visualizer can only be controlled from a close
distance, or if it cannot be controlled at all with the
infrared remote control, you may have to change the
batteries.
Open the cover on the back of the remote control
and replace the two 1.5 V AA batteries with new ones.
Check the polarity of the batteries!
Recycle the batteries!
Different IR Codes
If you want to work with more than one Visualizer in the same room, the units should be set
to different infrared codes, in order to control them all individually.
To change the IR code, enter the
Code" to A, B, C or D (code A is default). To change the IR code on the remote control,
simultaneously press PRESET 1, PRESET 2
key combination is used, the code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
and ZOOM WIDE .
The LED shows the selected code (it flashes one time for code A, two times for code B,
three times for code C and four times for code D).
Cleaning
Cabinet: Clean the cabinet by gently wiping it with a soft, lint free cloth.
Glass: Clean the glass by gently wiping it with a soft, lint free cloth (do not use a paper
tissue!). Clean by breathing on the glass to create moisture then wipe with lint-
free cloth (If not clean, use special optical cleaner only!).
Never use strong cleaning agents such as acetone or benzene!
These substances can damage the surface and anti-reflex coating!
Please note that dust on the mirrors (#1, #2) inside the unit and the glass has little effect on
the picture quality (as it is out of the focal range).
Opening the unit is reserved for WolfVision or authorized service personnel!
The unit might be in need of adjustment after opening.
on-screen menu, go to
To clean the mirror, the unit has to be opened!
"Misc. Settings" and set the "IR
(#29) and ZOOM TELE
WARNING:
17
TELE WIDE
PRESETS IMAGE TURN
1 2 3
A
FOCUS IRIS
AF
LIGHT TEXT EXT / INT ALL
MEMORY
1 3
2
HELP
4 5 6
7
8 9
MENU POWER
front
(#27). Each time this
ress PRESET 1, PRESET 2
IMPORTANT
-
+
X X
+
-
back (open)