Firmware Upgrades; Infrared Remote Control - WolfVision VZ-C11 Bedienungsanleitung

SWITCHING TO NEGATIVE, NEGATIVE/BLUE and BLACK/WHITE
The output image of the Visualizers can be switched from positive to negative in the on-screen menu.
In addition, the background of a negative image can be switched to blue for better readability of text.
You can also switch between color and black/white in the on-screen menu.
TIP: If you often switch to negative, negative/blue or black/white images you can assign this function to
one of the Preset keys (see page 9) in the on-screen menu.
Changing the standard contrast (color) settings
If the picture or the colors on your screen appear to be too dark, you can lower the overall contrast of
the picture in the "Color settings" menu of the on-screen menu. The settings can be made separately
for the normal mode and the text-mode.
Auto Power Off
In the "Power control" settings in the on-screen menu you can select that the Visualizer will be
automatically switched off, if not used for a certain amount of time.
RESET OF ON-SCREEN MENU SETTINGS
All settings in the on-screen menu can be set back to the factory defaults. "Reset" is one item in the on-
screen menu.
If you only want to reset a currently selected item to the default setting, press the Help key (Number 5
on the remote control #21) for 2 seconds!

FIRMWARE UPGRADES

The software (firmware) of your Visualizer (including the o
the latest version. The firmware update can be done via USB, Ethernet (LAN) or RS232.
First download the latest firmware and WolfVision's firmware update utility program from Wolfvision's
internet homepage at www.wolfvision.com/support.
Then connect the Visualizer to your computer and run the firmware update utility program. More details
on the firmware updates can be found on WolfVision's internet homepage.

INFRARED REMOTE CONTROL

Please note that an infrared remote control can only be used up to a certain distance from the unit.
Objects situated between the Visualizer and the infrared remote control, and weak batteries, interfere
with the reception.
TELE WIDE
PRESETS IMAGE TURN
A
FOCUS IRIS
EXT / INT
LIGHT TEXT ALL
-
MEMORY
HELP
X
+
MENU POWER
front back (open)
If the Visualizer can only be controlled from a close distance, or if it
cannot be controlled at all with the infrared remote control, you may have
to change the batteries. Open the cover on the back of the remote control
by hand and replace the two 1.5 V AA batteries with new ones.
Check the polarity of the batteries!
To change the infrared codes on the Visualizer, enter the
+
menu, by pressing the menu-key (#23) for one second, go to
Settings" and set the "IR Code" to A, B, C or D (code A is default). To
change the infrared code on the remote control, simultaneously press
X
PRESET 1, PRESET 2
-
combination is used, the code switches from A to B, C, D ... A ...etc. For
resetting the remote control to code A simultaneously p
PRESET 2 and ZOOM WIDE
n-screen HELP
(#14) and ZOOM TELE
.
10
) can easily be upgraded to
on-screen
"Misc.
(#13) - each time this key
ress PRESET 1,