Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CODES - Short Keys
Base and Camera head
One Push White Balance:
Press the LIGHT key (#16) for 2 seconds to perform one push white balance.
Activating the on-screen menu:
Press the MENU key (#60) (EXTERN key) on the camera head for 2 seconds to activate the on-screen
menu. Use the FOCUS keys (#58) to navigate and the FREEZE key (#56), PRESET key (#57) to select.
For the help function, press the ? HELP key (#59).
For resetting only the selected item press the ? HELP key (#59) for 2 seconds
Activating the on-screen Extra menu:
Press the MENU key (#60) and keep it pressed until the extra menu appears
Resetting the output mode to the default of "XGA at 60Hz":
Simultaneously press both FOCUS keys (#58) on the camera head and keep it pressed until the resolution
will be changed
.
Storing Preset 1:
Press the PRESET key (#57) on the camera head for 2 seconds.
Recalling Preset 1:
Press the PRESET key (#57) on the camera head quickly.
IR-Remote Control
Storing presets:
Press the desired PRESET key (#38) for 2 seconds.
Recalling presets:
Press the desired PRESET key (#38) quickly.
Activating the on-screen menu:
Press the MENU key (#54) to activate the on-screen menu. Use the Navigation keys (#32 and #53) to
navigate and OK key (#33) to select. For the help function, press the ? HELP key (#31).
For resetting only the selected item press the ? HELP key (#31) on the remote control for 2 seconds
Activating the on-screen Extra menu:
Press the MENU key (#54) and keep it pressed until the extra menu appears
Resetting the output mode to the default of "XGA at 60Hz":
Simultaneously press both FOCUS keys (#42) on the remote control and keep it pressed until the
resolution will be changed.
Change IR code:
Change the IR code in the
Code" to A, B, C or D (code A is default). To change the IR code on the remote control, simultaneously
press ress PRESET 1, PRESET 2 keys
p
combination is used, the code switches from A to B, C, D ... A ... in the order given.
For resetting the remote control to code A, simultaneously p
WIDE
.
The LED on the remote control shows the selected code (it flashes one time for code A, two times for code
B, three times for code C and four times for code D).
on-screen menu
"Advanced Settings / Miscelaneous Settings" and set the "IR
(#38)
and the ZOOM TELE key
ress PRESET 1, PRESET 2 and ZOOM
27
.
.
.
(#45). Each time this key
.
Werbung
