WolfVision VZ-8 light 4 Erste Schritte

Quick Setup Guide - First Steps
Before Starting
Connect the power supply and establish all needed cable connections.
Raise the arm up and turn the camera to working position.
Power Key
Switch the Visualizer on by pressing the POWER key.
Basic Menu Settings
When the Visualizer is switched on the first time, the Quick Setup Guide will be started automatically on-
screen (visible on HDMI and RGB output). Use the arrow keys to navigate through the menu.
Language
Select the desired language for the on-screen menu.
Ethernet Settings
Setup the network interface according your infrastructure.
Time Settings
Set time and date.
Feature Pack
The Visualizer offers the possibility to upgrade using an optional Feature Pack which adds additional
functionality. This upgrade will be activated by loading a valid Feature Pack code.
Depending on your order, the Feature Pack license code will be delivered together with the unit.
The Feature Pack is not pre-installed and user activation is required!
Consult the user manual to get the Feature Pack activated.
Manuals, Firmware, Apps, Software, Dimension Drawings,... @ www.wolfvision.com /SUPPORT
Printed in Austria - December 2016 www.wolfvision.com