WolfVision VZ-9.4F Bedienungsanleitung Seite 10

Keys on the Visualizer
One of the great features of WolfVision's Portable Visualizers is that only the most necessary keys are on
the unit itself. Therefore anyone can use it without instructions.
For more experienced users there are some additional functions on the remote control of the Visualizer.
Nearly all functions on the remote control can also be controlled through the keys on the camera head:
Base
The POWER and the LIGHT keys are capacitive touchsensors, just touch it to switch on/off (keep sensor
area clear).
#16 LIGHT key
Switches the top light on and off.
It toggles between top light, light field for slides and light off.
The LIGHT key also works as ONE PUSH WHITE BALANCE key if pressed for 2 seconds
Please note, when activating the slide light field, the Visualizer zooms to slide picture size.
#17 POWER key
Switches the unit on and off. When switching the unit on, the Visualizer automatically runs power-on preset.
Camera Head
Standard mode
#10
#56
#57
#58
#59
#60
Menu mode
#10
#56
#57
#58
#59
#60
#10 ZOOM WHEEL
Turn the wheel down to zoom in (TELE), and up to zoom out (WIDE). The more
you turn the ZOOM WHEEL, the faster the zooming works.
#56 FREEZE key / menu: select key - left
Freezes the current image. The FREEZE light indicates if the FREEZE-mode
is activated.
When on-screen menu is activated, it works as select key (see page 18).
#57 PRESET key / menu: select key - right
For storing the preset, press the PRESET key for more than 2 seconds. For
recalling the preset, press the PRESET key quickly (see page 12).
When on-screen menu is activated, it works as select key
#58 Manual FOCUS keys / menu: navigation key - up and down
When the Manual FOCUS keys are pressed the Visualizer switches off the
autofocus function.
Using the AF-key switches the autofocus function on again
When the on-screen menu is activated, it functions as navigation keys
page 18).
#59 AUTO FOCUS (AF) key / menu: help key
Switches the auto focus on and off. The AF light indicates if the AF is switched
on (see page 12) .
When on-screen menu is activated, it functions as Help key. Pressing this key
for 2 seconds resets the selected menu item
#60 EXTERN key / menu key
Switches between Visualizer image and external input (for more details - see
page 20).
The EXTERN light indicates that a signal from the external input is shown.
Pressing this key for 2 seconds activates the on-screen menu (see page 18).
(see page 18).
9
(see page 13).
(see page 18).
(see page 12).
(see