WolfVision VZ-9plus 3 Bedienungsanleitung

Additional Information regarding Antitheft Device
Anti-theft Device 1: T-bar lock
The Visiualizer can be fixed with a
be stolen. Follow the instructions from the cable lock manual.
Anti-theft Device 2: table lock bolt
table
(sectional view)
[6 5/8"]
M8
attachment
area
Printed in Austria, August 2009
security cable T-bar lock (Kensington Lock)
washer 8.4/16x1.6
screw M8x35 or
screw M8x50
167
1
2
The Visualizer can also be fixed onto a table with
the supplied table lock bolt in order to minimize the
risk of theft.
Please note that the usable depth of thread is
8mm, do not screw in more than this.
Supplied accessories for anti-theft device
(part number):
1x Socket head cap wrench 5mm
1x Socket head cap wrench 2,5mm
1x Screw M8x35
1x Screw M8x50
2x Washer 8.4/16x1.6
1x Assembly instructions VZ-9plus³
Lock Turntable
Remove the screw from the hole position 2 and
insert it into the specific hole position 1 (maybe the
turntable has to be turned until the thread is
visible).
Use supplied Allen screw driver (2,5mm).
Design and specifications are subject to change!
ENGLISH
®
, so that it can not
slot for lock
(101684)
(101685)
(101686)
(101687)
(100527)
(103259)