Remote Control - Topcom cleo Bedienungsanleitung

Cleo
MEMO Recording
The memo function allows the user at the answering machine location to leave a
message on the machine for the next user.
1. Press and release the MEMO/FAST FORWARD button
BEEP. The MSG indicator will light.
(8)
2. Start dictating your memo.
3. Press the STOP button to end the recording.
(9)
* A memo is counted as a message by the Message Counter
along with all ICMs recorded.
* A Memo Recording has no time limit but you should consider recording time left
for Incoming Messages.
Playing the Incoming Messages
The message counter will display the number of ICMs recorded up to a maximum of
9 though there may be more than 9 ICMs recorded. When the tape is full, the
answering machine will not answer any more calls.
1. Press and release the PLAYBACK/REWIND button
2. Adjust VOLUME CONTROL for comfortable listening level.
(27)
3. After the last message has been played, your unit will sound 2 BEEPS and will
automatically rewind the microcassette tape to the beginning. All old messages
will be automatically erased when new messages are recorded unless they have
been SAVED (see "Saving incoming messages after play back").
4. To pause during play back, press the STOP button
press the PLAYBACK/REWIND button
5. To rewind and review a message during play back, press and hold the PLAY-
BACK/REWIND button . Release the PLAYBACK/REWIND button
(7)
to resume normal play back.
(7)
6. To fast forward during play back, press and hold the MEMO/FAST FORWARD but-
ton . Release the MEMO/FAST FORWARD button
(6)
normal play back.
40
. You will hear a
(6)
and will be played
(24)
.
(7)
. To resume play back,
(9)
.
(7)
to resume
(6)
Cleo
Saving Messages after Play Back
After you have played back your last recorded message, you will hear 2 beep tones
and the cassette tape will automatically rewind to the beginning. If you wish to save
the messages, press and hold the STOP button
starts blinking. Your messages are now saved. New messages will be recorded after
the saved messages. The message counter will display the total number of new and
saved messages.
Erasing Messages
After play back of your last recorded message, you will hear 2 beep tones and the
tape will automatically rewind to the beginning. New messages will automatically
be recorded over old messages unless you press and hold the STOP button
See "Saving messages after play back" above.

REMOTE CONTROL

IMPOR TANT : Always call from a true touch tone telephone (DTMF) for remote oper-
ation of your unit. The decoder is available as an option.
Security Code
To operate your unit by remote control you first have to gain access to your unit by
using a Security Code. This unit is factory preset with code 2
41
until the MSG indicator
(9) (8)
.
(9)