Steering Wheel Remote Control; Replacing Battery - Clatronic AR 759 Bedienungsanleitung

19. STEERING WHEEL REMOTE CONTROL

1. Replacing Battery

In order to ensure proper functioning of the steering wheel remote con-
trol. Please make sure only use 2 x AAA type battery.
If the device to be controlled no longer responds to any key press even under fa-
vourable circumstances or the device to be controlled indicates a weak battery,
please replace the battery of the remote control.
→ Remove the remote control from the steering wheel as show in P1 & P2.
→ Push the battery compartment lid on the back of the remote control in direc-
tion of the gap and open the battery compartment.
→ Remove the dry battery, and replace with 2 new AAA battery.
Caution: Batteries are not to be disposed of together with domestic wastes.
Dispose of the used batteries at the relevant collection bin or at your
dealer's.
Warning: Do not expose the batteries to high temperatures or direct
sunlight. Never throw batteries into the fire. There is a danger of Explosion!
2. Mounting the Steering Wheel Remote Control
Step 1. Open the locking cover on the rear side of the remote control.
Step 2. Hold the remote control inside the steering wheel and guide the strap thru & under the locking cover
Step 3. a Tighten the strap slightly and then press it with the perforation firmly into the matching catches on
the locking cover. b Press Down the locking cover.
Step 4. Close the locking cover a and then push it in the direction of the lock b position.
Step 5. Release the locking cover. Now the lever should engage firmly through the tension of the strap. If the
locking cover should not engage, or the remote control should not fit firmly enough on the steering
wheel, please repeat steps 3-5.
Step. 1
In order to improve adhesion in the case of steer-
ing wheels with large internal diameter, use a
foam rubber pad and bond it to the base com-
partment lid of the remote controlbefore installa-
tion.
Battery Insert Guide
When you insert the battery, remember always put the rope wrap around the battery as shown
in P 3. This can help to remove the batteries easily in the future.
Step. 2
71
Step. 3
Step. 4
Base
Compartment
Rope