Call Transfer - Clatronic AR 759 Bedienungsanleitung

OUTGOING CALL
•
Use the mobile phone which paired with this unit to making an outgoing call. Once the user has com-
pleted the dialling, the display should show "CALL >>>".
The audio output of the present mode will ONLY be muted after pressing the "PHONE" button as a con-
firmation to dial the outgoing call.
While there is an outgoing call or under talking mode, the Panel Open/Eject key is disactivated.
•
During the talking mode, the LCD Display will display " TALK 001 ".
•
User can use the volume up/down to adjust the volume level.
•
To end the conversation, press the "CLEAR (BAND)" button. The unit will switch back to the previous
mode automatically. The mute of the previous mode will be released at the same time.
•
During the talking mode, if the Ignition is being turned off, the unit will keep the conversation even if the
Ignition is switched off. After finished the conversation, User can press "CLEAR (BAND)" button to
switch off the unit.

CALL TRANSFER

TO AUDIO TRANSFER FROM HEAD UNIT BACK TO THE MOBILE PHONE
•
During the talking mode, user can LONG press the "TRANSFER" (MODE) button more than 3 seconds
to transfer the audio from the unit back to the mobile phone for privacy reason. The LCD Display will
TRANSFER !
After the "Transfer" button is pressed, the mute of the present mode will be released at the same
time.
When making an outgoing call, it's'not possible to CALL TRANSFER if the call is not being answered
yet. It's only possible to Transfer the call to the Mobile Phone after the call is being answered.
Depending on different type of Mobile Phone, the time need for activating the CALL TRANSFER
mode is different. Like Nokia Mobile Phone usually takes 3-5 seconds after pressed the
"TRANSFER" button for audio transfer back or forth through Unit to mobile phone.
HIGHLIGHT FEATURES
•
Incoming call ringing volume.
Preset the Ringing volume level for any incoming call.
Please see "MENU"- "PHONE VOL" for details operation.
64