Sd Video Output Setup; Audio Output Setup; Other Settings - General satellite HD 9300 Bedienungsanleitung

7. INSTALLATIoN

7.7 SD video output setup

TV Video output
Available options: PAL, SECAM.
TV Aspect Ratio
Available options: 16х9, 4х3.
TV Conversion Mode
Available options: Pan-Scan, Letter box, Combined,
As is.

7.8 Audio output setup

This item is completely similar to Step 3 of the Installation wizard.

7.9 other settings

Transparency
Setting of the degree of transparency of the
image of information banner the window for the
list of channels, time indication, etc. The value is
changeable within the limits of 0-70%, with an
increment of 10%.
Display time
Setting of the time of displaying of the brief
information banner.
Duration can be changed within the limits from 0 to
30 seconds. The values 0...9 should be entered in
the format of 0х (i.e. 00, 01, etc.). In case of selection
of "0" value the information banner would not be displayed.
Power -On Mode
Standby – after connecting the Receiver to electric mains it would be in standby mode, and for switching-
on of the device it would be necessary to turn it to operating mode using the button STANDBY [1].
Operate – Receiver would be in operating mode after connecting to electric mains.
Installation Mode
Beginner – this mode disables editing of PID, the expanded information banner displays incomplete
information about the channel.
Expert – this mode enables editing of PID and transponders. It makes possible complete review of the
information about channel in the expanded information banner.
83