The Main Functions; Switching Between The Channels - General satellite HD 9300 Bedienungsanleitung

4. INSTALLATIoN wIzArD
Automated updating
Options: Yes, No.
Yes - the Receiver would use the data transmitted
by the broadcaster in the composition of the signal
for setting of the system time and date.
No - the Receiver would use the date and time
entered by you manually at this stage of setup.
Year, Month, Day
Using NUMERICAL buttons 0 ~ 9 [5], enter the time
and date.
Local time
Current system time is displayed here, in compliance
with your settings.
To return to the previous step of the Installation wizard select Back and depress the OK [24] button.
To complete the activity of the Installation wizard select ОК on the screen and depress the OK [24]
button on the remote control.

5. THE MAIN fUNCTIoNS

5.1 Switching between the channels

To switch between the channels, either of the following methods can be used:
1. Enter channel number, using NUMERICAL buttons 0 ~ 9 [5] on the remote control;
2. Switching to the next/previous channel can be made using the buttons CH+/CH- [14] or
NOTE!
Channels can also be switched with the help of the list of channels and electronic programme guide.
Switching between TV/Radio channels is made with the help of the TV/RADIO [27] button.
To return to the previously watched channel, depress the LAST [9] button.
/ [8].
67