General satellite HD 9300 Bedienungsanleitung Seite 64

4. INSTALLATIoN wIzArD
Step 2
At this step of the Installation wizard one should
specify the settings of HD video output.
Move the cursor using the buttons
line of the required settings.
Select the required setting using the buttons
[8] or depress OK [24] to select from the drop-
down list.
To select from the drop-down list, use the buttons
[8] and acknowledge by depressing the button OK
[24].
To return to the previous step of the Installation
wizard, select Back and depress the OK [24] button.
To return to the next step of the Installation wizard, select Further and depress the OK [24] button.
First, it is offered to set up the HD AV video output:
TV Video output
Here you can specify desirable resolution of the screen. Available options: 576Р, 720Р, 1080I.
TV Aspect Ratio
Available options: 16х9, 4х3.
TV Conversion Mode
Available options: Pan-Scan, Letter box, Combined, As is.
Step 3
At this step of Installation wizard it would be
required to specify audio settings.
Digital output
Available options: Stereo PCM, As is.
Down mix type
Available options: Stereo, Mono, Surround.
Volume Contraction:
Available options: RF mode, Line out.
Step 4
At this step of the Installation wizard one can select settings of the antenna system, specify the name of
satellite and type of searching of channels.
By default, the settings recommended by the satellite TV operator are selected.
64
/ [8] to the
/
/