Sw Update Via Usb; The Main Menu - General satellite HD 9300 Bedienungsanleitung

5. THE MAIN fUNCTIoNS
5.13 Updating of the software (Sw) of the receiver

5.13.2 Sw update via USB

NOTE!
Never switch off the power supply of the Receiver during updating of SW!
The previous session of working with USB flash-store in the personal computer shall be correctly completed!
The flash-store shall comply entirely with the USB 2.0 specification!
Operating procedure when updating the SW via
USB:
1. Insert the USB flash-store with SW update into
the USB port of switched-on Receiver.
2. A message would be displayed, about the
available update.
3. Select Yes and depress the ОК [10] button.
4. Receiver would download the SW from the flash-
store, and the process of SW updating would start.
5. Wait until displaying, on the front panel, of the
symbols «b-XX», where ХХ is the percentage of SW
updating.
6. Remove the flash-store from the USB port without waiting until completion of the process of
updating.
7. After replacement of the software the Receiver would automatically restart with the new version of
the SW.

6. THE MAIN MENU

The Main Menu is called by depressing the button
MENU [17].
The Main Menu and all enclosed sections are full-
screen.
The structure of the full-screen Menu:
• Menu title;
• Context help field – contains the information
about possible actions (selection from the list, entry
of value, etc.) for each item of the Menu;
• Panel of function buttons – contains four
coloured buttons in the same order as on the
remote control. If a button is active, it has the name
(change, rename, etc.); if a button is inactive, it has no name;
• Menu items – to select a Menu item, use the buttons
[24], to cancel, or to move one level up, use EXIT [23].
76
/ [8], to acknowledge the selection, use OK