Automatic P Ttl Fill-In Flash Mode - Metz Mecablitz 64 AF-1 digital -Pentax Bedienungsanleitung

Setting the mode of operation
• Switch on the flash unit with the
button.
The start screen appears. Thereafter, the
MB 64AF-1
flash unit always switches on with the
digital
mode of operation that was used last
PEN
(e.g. M flash mode).
V 1.0
M
• Press the displayed mode of operation on
the touch display as many times as it takes
9.0 m
for the display for selecting the mode of
operation to appear.
M-
5,6
m
35
Zoom F
m
P
1/1
O
MODE
• Press the
touch display and select the desired mode
PTTL
of operation.
A
• Press on the selected mode of operation
that is highlighted in yellow. The setting is
p
q
adopted immediately.
PTTL
• Set a suitable mode of operation on the
camera, e.g. P, Tv, Av, M etc.
0.8- 9.0 m
• Tap the shutter release to transfer data bet-
M-
ween the flash unit and the camera.
5,6
m
35
Zoom F
m
EV
sensor buttons on the

7.2 Automatic P TTL Fill-in flash mode

The automatic P TTL fill-in flash mode is acti-
vated by most cameras when the automatic
programme P is selected and by Vari or sub-
ject programmes during daylight (see camera
operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots.
The camera's computer-controlled metering
system sets the most suitable combination of
shutter speed, aperture and flash output.
+
Ensure that the contre-jour light source does
not shine directly into the lens, as this will
interfere with the camera's TTL metering
system!
There is no setting or display for automatic
P TTL fill-in flash in the flash unit.
k
175