Optional Accessories - Metz MECABLITZ 45 CL-1 Bedienungsanleitung

12. Optional Accessories

Malfunctions and damage caused to the mecablitz due to the use of
accessories from other manufacturers are not covered by our guarantee!
• Bag 45-29 (Order No: 0004529)
for telephoto attachment 45-33.
• Battery holder 45-39
For alkaline manganese batteries.
• Battery charger set B 45 (Order No: 0012045)
NiCad battery and charger for subsequent conversion of the 45 CL-1
Battery model to NiCad battery operation.
• Bounce diffuser 60-33 (Order No: 0006033)
To soften heavy shadows with reflected light.
• Bracket adapter 45-35 (Order No: 004535)
For parallax correction of reflector and camera with close-ups and wide-
angle shots.
• Bracket adapter 60-28 (Order No: 0006028)
Similar to 45-35, except adjustable in height.
• Camera bracket 70-35 (Order No: 0007035)
To attach the flashgun to the side of the camera.
• Camera cable release 45-26 (Order No: 0004526)
The camera shutter can be tripped with the same hand that is holding the
flashgun. This frees the other hand for focusing.
• Electric shutter release 45-25 (Order No: 0004525)
As 45-26, except with switch for electric actuation.
• Ever-ready case 45-34 (Order No: 0004534)
for flashgun and accessories.
• Filter set 45-32 (Order No: 0004532)
Consists of a set of 4 colour effects filters and 1 clear filter to hold any
coloured foil.
• Light reducing filter set 45-28 (Order No: 0004528
36
Consists of three neutral density filters, and a transparent filter holder for
coloured foils.
• Mecalux 11 (Order No: 0000011)
Slave triggering unit. For optical, delay-free remote triggering of slave
flashguns by a camera-triggered flash. Responds also to infrared light
beam. Does not require batteries.
• Mecalux Holder 60-26 (Order No: 0006026)
To mount the Mecalux 11.
• Mecamat 45-46 (Order No: 0004546)
External sensor that significantly extends the application range of the
mecablitz. 11 auto apertures are available. „MANUAL" provides 7 co-
ordinated light output levels with 7 fixed flash durations. Built-in viewfinder
with parallax compensation for close-ups. Two measuring angles of 25°
and 12° for optimal measurement.
• NiCad battery pack 45-40 (Order No: 0004540)
• Power Pack P 50 (Order No: 0012950)
For a high number of flashes and short recycling times (approx. 300 full-
power flashes)
• Shoulder strap 50-31 (Order No: 0005031)
• Stabilizing set 30-28 (Order No: 0003028)
Ensures that the camera cannot be inadvertently turned on the bracket.
• Standard foot 301 (Order No: 0093014)
Used in conjunction with SCA 300 A for connection to camera hot shoe.
• Synch leads:
Coiled synch lead 45-49 (Order No: 0004549)
Coiled synch lead 45-54 for hot shoe (Order No: 0004554)
Synch lead 45-48, 1 m (Order No: 0004548)
Synch extension lead 60-54 (5 m) (Order No: 0006054)
• Telephoto attachment 45-33 (Order No: 0004533)
For flash shots with telelenses. Nearly doubles the guide number. Infrared
shots are also possible.