Optional Accessories; Disposal Of Batteries - Metz MECABLITZ 60 CT-1 Bedienungsanleitung

12. Optional accessories

Malfunctions and damage caused to the mecablitz 60 CT-1 due to the
use of accessories from other manufacturers are not covered by our
guarantee!
• Bounce diffuser 60-33 (Order No: 000060334)
To soften heavy shadows with reflected light.
• Battery charger B 27 (Order No: 000100272)
to charge the 60-38 battery and 60-39 NiCad pack
• Camera bracket 70-35 (Order No: 000070353)
To attach the flashgun to the side of the camera.
• Camera cable release 45-26 (Order No: 000045265)
The camera shutter can be tripped with the same hand that is holding the
flashgun. This frees the other hand for focusing.
• Filter set 60-21 (Order No: 000060213)
Consists of a set of 4 colour effects filters and 1 clear filter to hold any
coloured foil.
• Mecalux 11 (Order No: 000000112)
Slave triggering unit. For optical, delay-free remote triggering of slave
flashguns by a camera-triggered flash. Responds also to infrared light
beam. Does not require batteries.
• Mecalux Holder 60-26 (Order No: 000060264)
To mount the Mecalux 11.
• Shoulder strap 50-31 (Order No: 000050319)
• Shoulder strap 60-80 (Order No: 000060802)
• Synch leads:
Coiled synch lead 60-52 (Order No: 000060525)
Synch extension lead 60-54 (5 m) (Order No: 000060541)
• Telephoto attachment 60-42 (Order No: 000060420)
For flash shots with telelenses. Nearly doubles the guide number. Infrared
shots are also possible.
34
• Connecting cable 60-61 (Order No: 000060611)
3 m cable
• Connecting cable, coiled, 60-59 (Order No: 000060592)

Disposal of batteries

Do not dispose of spent batteries with domestic rubbish.
Please return spent batteries to collecting points should they exist in your
country!
Please return only fully discharged batteries.
Normally, batteries are fully discharged if:
- The device they powered switches itself off and indicates "Spent Batteries".
- They no longer function properly after prolonged use.
To ensure short-circuit safety please cover the battery poles with adhesive
tape.