Technical Data - Metz MECABLITZ 20 C-2 Bedienungsanleitung

Forming the flash capacitor
The flash capacitor incorporated in the flash
unit undergoes a physical change when the
flash unit is not switched on for prolonged
periods of time. For this reason it is necessary
to switch on the flash for approx. 10 minutes
every 3 months. The batteries must supply suf-
ficient power for flash readiness to be indica-
ted within 1 minute after the flash was swit-
ched on.
k
Metz does not accept any liability for
faulty functions or damage to the flash
caused by the use of accessories from
other manufacturers!
76

9. Technical data

Tilting range and locking positions of flash
head:
vertically 30° - 45° - 60° - 90°
Flash duration: 1/1200s - 1/25,000s
Colour temperature: approx. 5500 K
Film speed: ISO 25 to ISO 400
Auto apertures: f/2,8 - f/5,6 with ISO 100
Synchronisation: Low-voltage ignition
Number of flashes (at full light output):
approx. 75 with batteries (600 mAh)
approx. 150 with high-capacity alkaline mang-
anese batteries