Metz MECABLITZ 15 MS-1 digital Bedienungsanleitung Seite 78

SYSTEM
• Press the button
NIK REMOTE
unit. The most recently used setting
Ch ALL Gr A
S E L
OK appears in the display, e.g.:
SYSTEM
• Press the button
S L AV E
SLAVE" appears in the display.
S E L
OK
L E A R N
• Press button
YES
NO
display appears:
S E L
OK
• Switch-on (YES) the "LEARN" func-
L E A R N
NO YES
tion with the
S E L
OK
• Press
OK
TA K E A
appears:
P I C T U R E
The flash unit waits for a flash light
⊃ ⊃
from the camera's own flash unit.
The bar display continually fills as
long as no light impulse is received
from the camera's own flash unit.
• Press the release button on the
camera so that the camera's own
flash unit is activated.
L E A R N O K
If a light impulse has been received
by the mecablitz 15MS-1 digital, the
bar display stops filling. In the
display, "LEARN OK" appears and a
red light in the „AF-/SELECT" button
lights up briefly as confirmation.
78
S E L on the flash
until "SYSTEM
S E L
drücken. In the
button.
button. In the display
The mecablitz 15MS-1 digital has
now learnt to recognise the flash
SL Ratio
1:1
light of the camera flash unit. In the
P / R
display appears:
• If both the reflectors should be set to
SL Ratio
an unequal ratio (Ratio) then press
4:1
the button
P / R
ratio of both the reflectors.
• If you wish to use partial lighting,
SL Power
then press the button
1/1
P / R
Following display appears:
• To set partial lighting, press the but-
SL Power
tons
1/4
P / R
value. In the display appears, for
example.
The setting thus made will be automa-
tically saved
If the "Learn function" has already
been operated once, these settings
are retained until the learn function
is used for the next time.
If the setting to reduce the "red-eye
effect" is changed, the learn function
must be repeated.
or to change the
P / R
or and thus change the