Operation - Kärcher WD 5.2series M Originalbetriebsanleitung

Adapter

To connect the suction hose with an elec-
tric tool.
(see description / illustration

Adapt the adapter to the connection diam-
eter of the electric tool using a knife if nec-
essary.
Flexible tool hose

For more flexibility when working with
electric tools.
Note: Can also be used with an adapter.
(see description / illustration
Coarse dirt set

Extensive vacuum set for coarse dirt of all
kinds.
Always work with an inserted cartridge
filter - during wet as well as dry vacu-
um cleaning!
Before Startup
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.

Illustration
Recommendations for appliances
without efficient filter cleaning: To vac-
uum fine dust, use the filter bag.

Illustration
Connect accessories.

Illustration
Plug in the main plug.
 Illustration
Turn on the machine.
Dry vacuum cleaning
Work only with a dry cartridge filter!

Caution: Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
16
)
)

Operation

Start up
Recommendations for appliances without
efficient filter cleaning: To vacuum fine
dust, use the filter bag.
(see description / illustration

The filling level of the filter bag depends
on the dirt that is sucked in.
Clogged filter bags can burst - therefore
make sure to replace the filter bag in a
timely manner!
The filter bag needs to be replaced more
frequently while sucking in fine dust, sand,
etc.
For appliances with efficient filter clean-
ing: When vacuuming without a filter bag, the
filter cleaning indicator lights up red if the car-
tridge filter needs to be cleaned.

Use efficient filter cleaning.
(see description / illustration
Wet vacuum cleaning

Attach the accessories to vacuum mois-
ture or wetness to the suction pipes or di-
rectly to the handle.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container.
Working with electrical power tools

Adapt the adapter to the connection diam-
eter of the electric tool using a knife if nec-
essary.

Illustration
A) Plug the enclosed adapter onto the
handle of the suction hose and connect
the electric tool with the connection.

or
B) Use the flexible tool hose to gain more
flexibility in your work. Connect this hose
to the suction hose and to the adapter and
then to the connection of the electric tool.

Illustration
For appliances with built-in socket:
Connect the mains plug of the electric
power tool to the vacuum cleaner.
– 4
EN
)
)