Herunterladen Inhalt Inhalt Diese Seite drucken

Blowing Function; Interrupting Operation - Kärcher WD 5.220 M Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für WD 5.220 M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Crevice nozzle, 350 mm
 For edges, joints, heaters and hard to
reach locations.
Car vacuuming tool
 For cleaning car seats, carpeted surfac-
es, trunk and foot space.
Operation
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
Before Startup
 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Illustration
Recommendation: To vacuum fine
dust, use the filter bag.
Start up
 Illustration
Connect accessories.
 Illustration
Plug in the main plug.
 Illustration
Turn on the machine.
Dry vacuum cleaning
Work only with a dry cartridge filter!
 Caution: Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
Recommendation: To vacuum fine dust,
use the filter bag.
(see description / illustration
 The filling level of the filter bag depends
on the dirt that is sucked in.
Clogged filter bags can burst - therefore
make sure to replace the filter bag in a
timely manner!
 Attach the accessories to vacuum mois-
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er.
Cleaning hard to reach locations or, where
vacuuming is not possible, like leaves from
a gravel bed.
 Illustration
 Turn off the appliance.
 Illustration
 Turn off the appliance and disconnect
Empty the container
 Illustration
Storing the appliance
)
 Illustration
– 8
EN
The filter bag needs to be replaced
more frequently while sucking in fine
dust, sand, etc.
Wet vacuum cleaning
ture or wetness to the suction pipes or
directly to the handle.
Caution:

Blowing function

Connect the suction hose to the blower
connection, this will activate the blower
function.

Interrupting operation

Hook the floor nozzle into the parking
position.
Finish operation
the mains plug.
Remove the appliance head and empty
the reservoir filled with wet or dry dirt.
Stow away the mains cable and acces-
sory at the machine. Store the appli-
ance in a dry room.
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis