Flash Light - Knurr CoolTherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung
Digital inputs/outputs, freely configurable
Component Function
K40 – Output of messages generated
digitaler output 1 via the internal logic configuration
1 changer
K41 –
digitaler output 2
1 changer
K42 –
digitaler output 3
1 changer
K43 –
digitaler output 4
1 changer
digital input 1 Digital inputs, can be linked via
the logic configuration with
digital input 2
internal variables AND / OR; the
result is available from the digital
digital input 3
outputs
digital input 4
digital input 5
digital input 6
digital input 7
digital input 8
Joint voltage (+24V) for digital
inputs
Voltage supply Fusing of +24V for digital inputs
for digital
inputs/outputs

Flash Light

P2 - Activ if at least one of the
Flashlight following alarms occurs:
collective error
water alarm
(alarm = 1) smoke alarm
warm air upper alarm
cold air upper alarm
cold air lower alarm
humidity upper alarm
humidity lower alarm
flowmeter deficient
fire detection main alarm
Sensorfehler
fan 1 failure
fan 2 failure
fan 3 failure
voltage supply of optional
packages missing (optional)
server shutdown at excess
temperature was not working
CoolTherm
Assembly Connection Variables
3-DO4:1 63.1.1
3-DO4:2 64.2.1
3-DO4:3 63.1.4
3-DO4:4 64.2.4
6-DI4:1 59.1.1
6-DI4:2 60.2.1
6-DI4:3 59.1.4
6-DI4:4 60.2.4
7-DI4:1 61.1.1
7-DI4:2 62.2.1
7-DI4:3 61.1.4
7-DI4:4 62.2.4
6-DI4:24V1 59.1.2
7-DI4:24V1 61.1.2
6-DI4:24V2 60.2.2
7-DI4:24V2 62.2.2
2-PWR IN
ILC150:O3 3.1.4
01_998_330_0_m
SNMP
out_10 Status check
Trap in case of
status change
out_11
out_12
out_13
ctmr_in_10 Status check
ctmr_in_11
Trap in case of
status change
ctmr_in_12
ctmr_in_13
ctmr_in_14
ctmr_in_15
ctmr_in_16
ctmr_in_17
No
ONBOARD_ No
OUTPUT_BIT2
page / Seite 74/157