Knurr CoolTherm Bedienungsanleitung Seite 54

CoolTherm
Manual / Bedienungsanleitung
Status
After successful login, the status page will open displaying all the current state temperatures. This
page can be seen by users authorised for both Levels and 1 and 2; setting changes are not
possible here.
Status page
All contacts are displayed green in their normal status and, in the event of an alarm, turn red. The
name fields of analog values are not coloured in their normal states;
they will turn
yellow when exceeding their upper warning limits,
red when reaching their upper warning values
and blue at their lower alarm values.
Depending on the number of inserted fan racks and the options installed, the display may vary
from the figure.
The value settings for upper and lower alarms and warnings are possible only on User Level 2 on
the Service page within the scope of adjustment (
The set values for server supply air (valve control) and server return air (fan control), the threshold
values for alarms and warnings are also default here.
CoolTherm
Table default setting).
01_998_330_0_m page / Seite 54/157