Knurr CoolTherm Bedienungsanleitung Seite 63

CoolTherm
Manual / Bedienungsanleitung
SNMP MIB
In order to monitor the CoolTherm and the server cabinet attached to it by SNMP it is necessary to
link the MIB into the network management system in use. The following table lists all elements
contained in the MIB. Depending on the option applied, not all OIDs are used.
Content
enterprises.knuerr.cooling.coolControl
1.3.6.1.4.1.2769.2.1.
coolEnvironment
temp1
temp2
temp3
temp4
hum1
tempOutWater
CoolTherm
temp1Name
temp1CalibrationOffset
temp1Current
temp1SettingLevel
temp1WarningLevel
temp1AlarmLevel
temp2Name
temp2CalibrationOffset
temp2Current
temp2NormLevel
temp2WarningLevel
temp2AlarmLevel
temp2DoorsOpenLevel
temp2ServerOFFLevel
temp3Name
temp3CalibrationOffset
temp3Current
temp3WarningLevel
temp3AlarmLevel
temp4Name
temp4CalibrationOffset
temp4Current
temp4WarningLevel
temp4AlarmLevel
hum1Name
hum1Current
hum1LowAlarmLevel
hum1UpperAlarmLevel
tempOutWaterName
01_998_330_0_m
Object Object Object
Explanation
1 2 3
1 Analog inputs
1 Temperature server return air CL / CT
1 Warm air
2 Offset temperature
3 Temperature value, return air
4 Normal value
5 Upper warning threshold
6 Upper alarm value
Temperature server supply air CL /
2 CT
1 Cold air
2 Offset temperature
3 Temperature value, supply air
4 Normal value
5 Upper warning threshold
6 Upper alarm value
7 Door opening value
8 Server shutdown value
Temperature server return air, right
3 rack
1 Warm air, left
2 Offset temperature
3 Temperature value, return air
4 Upper warning threshold
5 Upper alarm value
4 Temperature supply air, right rack
1 Cold air, left
2 Offset temperature
3 Temperature value, supply air
4 Upper warning threshold
5 Upper alarm value
7 Relative humidity
1 Name humidity
2 Humidity value, air
3 Lower alarm value
4 Upper alarm value
8 Chilled water, return
1 Name chilled water, return
page / Seite 63/157