Description; General Function; Top View - Knurr CoolTherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung
3.

Description

3.1

General function

CoolTherm complies with the conditions of EN 60950
The modular design facilitates the installation of all 19" equipment of varying depth.
Heat produced by installed equipment (e. g. servers) is reliably removed using the cold water
system integrated into the server cabinet. The cooling system is inherently safe because water
cannot reach the server area.
The cooling system comprises a high-performance air/water heat exchanger, fans with fan control
unit (fan-speed according to heat load) for the ducted supply of air and cold water connection.
The air circuit is closed such that no heat (thermal load) is emitted to the environment.
Attention! CoolTherm only works if cold server feed air
and heated server outlet air are fully separated.
Height units not in use have to be sealed using blanking panels.

Top view

CoolTherm
Air duct
Luftkanal
WARM WARM
WARM WARM
Server
Air separation
Lufttrennung
COLD
KALT KALT
figure CoolTherm top view
01_998_330_0_m page / Seite 7/157