Network Setting - Knurr CoolTherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung

Network setting

The network settings can be altered after successful login on Level 2 via the button Network. The
following are default values:
IP address:
Net mask:
Network settings
For any change, the new values need to be entered into the respective boxes and to be
transferred by using the send button. After a short waiting time, the control needs to be started
anew by means of the reset button in order to activate the changed data.
NTP server:
For synchronising the internal realtime clock with a time server, its address is entered here as well
as the updating interval in seconds. As another option, the clock can be set manually via the RTC
page.
CoolTherm
1.1.199.88
255.255.255.0
01_998_330_0_m page / Seite 57/157