Technichal Data - Knurr CoolTherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung
- Adjusting Magnet Plate:
After rack transport and setup check the position of the magnet plates, it could be
necessary to adjust the magnets to the retain plate. Therfore turn both adjusting screws
(A) until the magnets are in a absolute parallel position to the retain plate and the door
remains closed.
The screw position is to be fixed by locking the nut (B) to threaded bushing,
A
B
figure detail magnet
Manual closing:
Note: Rear door must be closed before front door! (safety function)
- Press LED switch for electromagnet activation
- LED lights
- Push door evenly shut, both magnetic areas must bond
Manual opening:
Note: Rear door opens only when front door is opened! (safety function)
- Press LED switch - green LED doesn't light
- Rack door opens itself

Technichal Data:

Power supply for electromagnets
Output:
CoolTherm
24 V DC
max. 100 W
01_998_330_0_m page / Seite 35/157