Installation Of Distribution To Supply Single Servers (Option); Automatic Door Opening (Option) - Knurr CoolTherm Bedienungsanleitung

CoolTherm
Manual / Bedienungsanleitung
6.7

Installation of distribution to supply single servers (option)

Various power distribution systems can be supplied at customer request.
The following power supply options are possible.
- single phase
- three phase
- separate single phases
- different power supply feeds and
- UPS supported networks
The server connections can be provided as fixed socket strips with different power cable and plug
systems. There is also a choice of different power outlets on the socket strips.
The various configurations can be found in the attached wiring scheme.
Various power distribution systems can be supplied at customer request.
6.8

Automatic door opening (option)

gas pressure
springs
figure cover CoolTherm with automatic door opening
Function
Front and rear door are kept closed with two electromagnets.
The door will be pushed off smoothly by a gas pressure spring, if the power supply of the
electromagnets breaks.
The electric door opening can prevent damages through overtemperature in the rack as well as
occurring humidity.
If the doors are opened the thermal load can disappear to the room. There is no overheating of the
servers.
CoolTherm
Upper cable
entry
(standard)
01_998_330_0_m
upper magnet
retaining plate
page / Seite 32/157