Meaning Of Error Codes - Saeco Incanto HD8911 Bedienungsanleitung

Meaning of error codes

Error code
1
3 - 4
5
14
Troubleshooting
Problem
The machine does not
switch on.
Problem
The coffee grinder is
blocked.
There is a problem with
the brew group.
Water circuit problem
The machine is
overheated.
If the above solutions do not help to remove the error code icon from the
display and bring the machine back to normal working order, contact the
Philips Saeco hotline. Contact details can be found in the warranty booklet
or on www.saeco.com/support.
This chapter summarizes the most common problems you could encounter
with the machine. If you are unable to solve the problem with the
information below, visit www.saeco.com/support for a list of frequently
asked questions or contact the Consumer Care Center in your country.
Cause
The machine is disconnected or the
main switch is in OFF position.
Cause
Coffee exit duct clogged Clean the coffee exit
The brew group is dirty.
The brew group is not
positioned correctly.
There is air in the water
circuit.
This can have several
causes.
Solution
Check if the mains cord is inserted
correctly
Make sure the main switch is in ON
position.
English
29
Possible solution
duct thoroughly with
the handle of the
multifunctional tool or a
spoon handle.
Remove the brew group
and thoroughly. (see
'Weekly cleaning of the
brew group')
Remove the brew group
and before you slide it
back into the machine,
make sure two
reference signs on the
side match.
Remove and place back
the water tank a couple
of times. Make sure you
insert it into the
machine properly.
Check if the water tank
compartment is clean.
Switch the machine off
and switch it back on
again after 30 minutes.
Try this 2 or 3 times.