Application; Technical Characteristics; Mounting / Installation - PR Elecronics 5116 Handbuch

PROGRAMMABlE TRANSMITTER
• Input for RTD, TC, mV, Ohm, potmeter, mA and V
• 2-wire supply > 16.5 V
• Bipolar voltage input
• Output for current, voltage and 2 relays
• Universal AC or DC supply

Application

• Linearised, electronic temperature measurement with RTD or TC sensor.
• Conversion of linear resistance variation to a standard analogue current /
voltage signal, i.e. from solenoids and butterfly valves or linear movements
with attached potentio meter.
• Power supply and signal isolator for 2-wire transmitters.
• Process control with 2 potential-free relay contacts which can be configured
for advanced functions.
• Galvanic separation of analogue signals and measurement of floating signals.

Technical characteristics

• Within a few seconds the user can program PR5116 to suit the specific
application.
• By way of the front push-button the input can be calibrated to the exact span
of the process. Zero drift on the process signal can be adjusted by a single
press of the front buttton.
• Continuous check of vital stored data for safety reasons.
• 3-port 3.75 kVAC galvanic isolation.

Mounting / installation

• Mounted vertically or horizontally on a DIN rail. As the modules can be
mounted without any distance between neighbouring units, up to 42 modules
can be mounted per metre.
PRETRANS 5116
29