Technical Data - Abicor Binzel 350GC Betriebsanleitung

2 Product Description
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use

2.3 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1 Ambient temperature
Type of voltage
Polarity of the electrodes
Type of use
Voltage rating
Shielding gas (DIN EN ISO 14175)
Wire type
Tab. 2 General torch data (EN 60 974-7)
Type Type of cooling
ABIROB
350GC
Tab. 3 Product-specific torch data (EN 60 974-7)
EN - 4
®
The ABIROB 350GC is used for MIG/MAG welding used in robot and
automatic use. Designated use also includes the observance of the prescribed
operating, maintenance and servicing instructions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorized conversions or power increase
modifications are not allowed. The warranty does not cover wearing parts and
damage due to overloading or improper use.
 3.2 Emergency information on page EN-6
Load CO
A
air 350 400
For pulse arcs and M21 mixing gas (DIN EN 439), the load data are reduced
by up to 35 %.
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC
Usually positive
automatic
141 V peak value
CO
2
Commercially available round steels
ED
2
%
100 60 0.9 - 1.2 mm
®
ABIROB
Wire ø Gas flow rate
mm l/min
ca. 20
350GC