Faytech 7 capacitive Bedienungsanleitung Seite 22

the following window:
2.Setting tab
When you touch the touch panel there is a beep if you
select the first checkbox. You can change the
frequency and duration of the beep. The changes will
be saved after you click on "OK".
Double Click Time. You can set how fast you need to
click on the same object to make a double click. If you
choose Shorter «, then you need to tap faster. If you
choose » Longer, then you can tap the screen more
slowly.
The same applies to Double Click Area. If you
choose Smaller «, your taps must be in a relatively
small area in order for a double click to be
recognized. » Larger enables you to make a successful
double- click within a larger area.
To the right of the mouse icon are options to set
different mouse-like modes. Normal mode offers the
most intuitive touch-operation.
Normal-Mode: Allows the user to select an object or
drag an object with a finger. This is the best mode to
use for most applications.
Click on touch: The "click" is recognized when the
screen is touched. To initiate a new mouse-click, the
display must be released and re-pressed.
Click on release: Contrary to the click function in
touch, it is generated a click when the display is
released.
Click on touch without moving cursor: The first touch
point generates a click. The cursor follows the finger
movement. For a better understanding of this setting,
try it with the Draw Test application under the Tools
tab.
Click on release without moving cursor: The cursor
does not move to the touch position except at the lift-
off point. For a better understanding of this setting,
try it with the Draw Test application under the Tools
tab.
Desktop Mode: It works as a mormal Mouse.
On the far right of the mouse icon, there is an Option
button. The following options are available for the
faytech display in this submenu:
22