Faytech 7 capacitive Bedienungsanleitung Seite 20

5. "Setup Type"
You can just deactive this driver, since the Monitor
does not have a corresponding connector.
6. "Setup Type"
We recommend "None" for the calibration setting,
because a capacitive touch panel do not need any
calibration.
7. "eGalaxTouch - InstallShield Wizard"
Connect the USB cable now and press "OK". If the
"New Hardware Found" dialog of Windows opens,
please cancel it.
8. "Setup Typ"
If you plan to use multiple monitors, please choose
this box.
9. "Choose Destination Location"
Accept the default destination or choose your own
then press "Next >".
10. "Select Program Folder"
Give the program a name or use the default setting
and press "Next >".
20