Touch Panel; Touch Panel Basics; Window Installation - Faytech 7 capacitive Bedienungsanleitung


Expansion of the possible operating voltage to
8-36V DC

Internal use of the Mini-PCI-E slot, the COM
and USB ports for additional devices such as
GPS, GPRS, UMTS

IP protection classes, other touch
technologies
T P
OUCH ANEL
T
OUCH PANEL BASICS
faytech's own TouchController series supports the
gesture control of Win7, Win8 and Win10 as well as
the use of the touch already within the Login window
without further driver installation. The capacitive
touch panel supports 10 touch points under windows
and one touch point under linux.
We suggest not to install any drivers under
Win7, Win8 or Win10 operation system.
For Win7, Win8 and Win10 please just install the
available drivers when you want to use Touch without
the gestures support as sole mouse alternative (as
sole mouse the touch panel will support only one
touch point).
W I
INDOW NSTALLATION
Please just install the available drivers when you want
to use Touch without the gestures support as sole
mouse alternative.
In the following, a Windows 7 installation is described.
1
. Go to our website www.faytech.com. At the
bottom of the page you will find the link for
downloads
(www.faytech.com/products/products/Attachment/lis
t/). Find "Drivers, Capacitive Touch Driver"
2
. Select the appropriate subdirectory ((\Touch Driver,
capacitive\Touch Driver, capacitive\(1)
eGalaxTouch_5.13.0.13911-Release-150529-ForPCAP)
to open the installation file setup.exe directly.
To complete the installation with all default options,
click "Next >" on each of the following dialog boxes.
You can "cancel" at any time. To switch back to a
previous step, click the "<back" button.
3. "Welcome to the InstallShield Wizard for
eGalaxTouch"
Press "Next >" if you to continue the installation. It's
advisable to close all other programs before beginning
this installation.
4. "Setup Type"
Check the box (see the picture on the next page upper
left) only if you want to install the PS/2-Driver. Usually
for a USB-touch display, you should NOT select this
option. The PS/2-Driver works smoothly with a PS / 2
mouse but if you do not have a PS / 2 mouse you
should leave this box unchecked to avoid
compatibility problems.
19