Renkforce BSD-3023 Bedienungsanleitung Seite 64

Operation
• LC display (8)
The LC display (8) shows all information depending on the audio source just played back (radio part, SD player, etc.).
• Button 0 / DISP (7)
This button displays different information on the LC display (8).
Press the button again to switch on the display.
If you do not continue pressing the button, the display will quickly return to the original information.
At RDS station reception:
Radio operation: Station name > Time > Transmission frequency > Programme type
SD/USB operation: Track display > Time > ID3 information > Station name > Transmission frequency >
Programme type
At non-RDS station reception:
Radio operation: Transmission frequency > time > PTY NONE
SD/USB operation: Track display > Time > ID3 information > Transmission frequency > PTY NONE
• Button / BND / LOU / CLR (5)
This button switches on or off the loudness function.
Press and hold the button to switch the loudness function on or off.
LOUD ON: The loudness switch is activated.
LOUD OFF: The loudness switch is deactivated. The sound is not influenced.

The human ear is less able to take up low and high sounds at low volumes. Lifting these frequency
ranges at low volumes (loudness correction) counters this effect and makes the music sound more
natural.
64
Operating Instructions

English