Renkforce BSD-3023 Bedienungsanleitung Seite 75

Operation
• Buttons  and  (2)
These buttons are used to select the individual tracks or to find a certain section within a track.

The arrows on the buttons indicate the search direction (forwards or backwards).
Press the buttons briefly to jump to the next or the previous track.
Keep the buttons pressed to search for a certain section within a track. Playback is then performed at an accelerated
speed.
• Buttons DIR - (20) and DIR + (21)
These buttons are used to select the directory on the storage medium.
DIR- (20) selects the previous directory.
DIR+ (21) selects the next directory.

If there is no directory structure on the storage medium, these buttons will have no function.
• Button / (15)
Press this button to briefly interrupt playback.
Press the button again to resume playback where it was previously interrupted.
• Button SCN (16)
Press this button to play about 10 seconds of each track.
Press and hold this button to play about 10 seconds of each track of the current directory.
To switch off this function again, press the button SCN (16) again.
Playback is then performed at normal speed again.
• Button RPT (17)
Press this button to keep repeating the current track.
Press and hold this button to keep repeating the tracks of the current directory.
To switch off this function again, press the button RPT (17) again.
75