Mechanical Installation - Renkforce BSD-3023 Bedienungsanleitung

Mechanical Installation

In most cars, the manufacturer intended an installation slot for the car radio. The installation place was selected
according to safety aspects. Therefore, it is suggested that the car radio be installed in this intended slot.
The device requires a DIN installation slot with the dimensions 182 x 53 mm. This installation size is standardised
and usually complied with by all car manufacturers.
If no installation slot is intended, learn about the correct car radio installation site from your car dealer.
Select your installation site carefully to prevent the device from impairing normal driving
activity of the driver.
Only use the included assembly material to guarantee for secure installation.
Changes to the vehicle that are required by the SD tuner or other components always have to
be performed so that there will not be any impairment of road safety or constructive car stability.
In many cars, the operational license will already expire from sawing out of a sheet metal part.
Since the device generates heat in operation, the installation site must be resistant to heat.
Before applying any attachment bores, ensure that no electrical cables, brake lines, the fuel
tank, etc. are damaged by it.
When using the tools for installation of your car HiFi components, observe the safety tool
manufacturer's notes.
When installing your HiFi system, observe the danger of accidents that devices torn loose may
cause in case of accidents. Therefore, attach every part securely at a site where it cannot
become any danger for the passengers.

Before device installation, verify the depth of the intended installation space.
53