Removal; Hands-Free Microphone - Renkforce BSD-3023 Bedienungsanleitung

Mechanical Installation

Removal

• Insert the two unlocking keys in the lateral slots between the device and installation frame until the device is
unlocked.
• If required, loosen the attachment screw at the rear of the device.
• Carefully remove the car radio from the installation frame using the unlocking keys.
• Loosen all electrical connections on the rear of the device and the aerial plug.

Hands-Free Microphone

The microphone for the hands-free device can be attached to the sun-blind, the steering column cover or any other
suitable place in the vehicle interior.
The microphone and connection line must never be located in the air-bag trigger range.
• Attach the hands-free microphone to a suitable place with a clamp or the included hook-and-loop tape.
• Place the connection line to the radio installation slot.
55