Renkforce BSD-3023 Bedienungsanleitung Seite 69

Operation
Function of the individual buttons
• Button / BND / LOU / CLR (5)
This button selects the radio part frequency range.
3 VHF ranges and one MF range are available:
F1 > F2 > F3 > MW

Each of the four frequency ranges can store 6 stations on the station buttons 1-6 (18).
• Buttons  and  (2)
These buttons change the receiver frequency to adjust the station in radio operation.
Pressing the button briefly starts automatic station search (display SEARCH).
The search will stop only when the next station with good reception is reached.
If a button is kept pressed for an extended period of time, manual station search is activated.
MANUAL appears in the display.
In this mode, the frequency is adjusted until the corresponding button is released again. Pressing the button briefly
changes the frequency step by step.

If the buttons are not pressed for an extended period of time, the device switches back to automatic
station search. AUTO appears in the display briefly.
• Station buttons 1-6 (18)
Briefly pressing these buttons enables direct search for a previously stored station.
To store the station just listened to, just keep the corresponding button pressed for more than 1 second.

Each of the three VHF ranges (F1-3) and the MF reception range has six station buttons. A total of 24
station buttons can be assigned.
69