Removal - Renkforce CD-3308 Bedienungsanleitung

For the fastening, proceed as follows.

Removal

• Remove the front control panel.
• Carefully remove the plastic frame in the front of the system, by bending it slightly to the outside and pulling it off
from the unit.
• Insert the two unlocking keys into the lateral slots between the CD tuner and the installation frame, until the CD
tuner unlocks.
• Remove the fastening screw at the back of the unit.
• Carefully pull out the radio with the unlocking keys from the installation frame.
• Disconnect the ISO plug, the aerial plug and the LINE connections.
44
Operating Instructions

English