Fuse Replacement - NSK Surgic Pro Handbuch

9. Fuse Replacement

If the Control Unit does not function, check the fuses (Fuse Box lock
located on the rear of the Control Unit). To access the Fuse, use
a pointed tool push on the fuse locking latch and the drawer will
spring open. (Fig.16)
10. Maintenance
10-1 Maintenance of the Control Unit and Foot Control
If blood or saline solution has stained the Control Unit or Foot Control, remove the AC Electrical Cord; wipe Control
Unit or Foot Control with a damp cloth, then with an alcohol-absorbed cloth.
10-2 Maintenance of the Handpiece and Motor
This handpiece and motor can be cleaned and disinfected with
a Thermo-Disinfector.
Attach the Protection Plug to the motor.
For detail, refer to the Thermo-Disinfector's Operation Manual.
CAUTION
• Always use the Protection Plug during Thermo-Disinfector.
• Do not use Protection Plug without the mounting O-Ring. It may cause a malfunction. If O-Ring had damaged,
replace it immediately.
NOTICE
Protection Plug O-ring is consumable supply. If it damaged, replace it new one.
Optional Protection Plug: Order Code 10001595
Protection Plug O-Ring: Order Code 0312457102
Protection Plug
Protection Plug O-Ring
18
Fuse
Fig.16
Fig.17