Herunterladen Inhalt Inhalt Diese Seite drucken

Makita EM4350RH Originalbetriebsanleitung Seite 26

Vorschau ausblenden Andere Handbücher für EM4350RH:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CLEANING OF FUEL FILTER
WARNINGμ INFδAεεABδES STRICTδY PROHIBITED
Interval of Cleaning and Inspectionμ εonthly (every ηί operating hours)
Suction head in the fuel tank
Check the fuel ilter (1) periodicallyέ To check the fuel ilter, follow the steps belowμ
1έ Remove the fuel tank cap, drain the fuel to empty the tankέ Check the tank
inside for any foreign materialsέ If any, remove themέ
βέ Pull out the suction head by using a wire hook through the tank openingέ
γέ If the fuel ilter clogged slightly, clean itέ To clean it, gently shake and tap it in
fuelέ To avoid damage, do not squeeze or rub itέ The fuel used for the cleaning
must be disposed in accordance with the method speciied by regulations in
your countryέ
If the fuel ilter became hard or heavily clogged up, replace itέ
ζέ After checking, cleaning or replacing, insert the fuel ilter into the fuel pipe (γ)
and ix it by the hose clamp (β)έ Push the fuel ilter in all the way to the bottom
of the fuel tankέ
Clogged or damaged fuel ilter can cause insuficient fuel supply and reduce enά
gine powerέ Replace the fuel ilter at least quarterly to ensure satisfactory fuel
supply to the carburetorέ
REPLACEMENT OF FUEL PIPE
CAUTIONμ INFδAεεABδES STRICTδY PROHIBITED
Interval of Cleaning and Inspectionμ Daily (every 1ί operating hours)
Replacementμ Annually (every βίί operating hours)
Replace the fuel pipe (1) every year, regardless of operating frequencyέ όuel
leakage may lead to ireέ
If any leakage is detected during inspection, replace the fuel pipe immediatelyέ
INSPECTION OF BOLTS, NUTS AND SCREWS
Retighten loose bolts, nuts, etcέ
Check the fuel cap and oil cap for tightnessέ Check for fuel and oil leakageέ
Replace damaged parts with new ones for safety operationέ
CLEANING OF PARTS
Always keep the engine clean by wiping down with a cloth ragέ
Keep the cylinder ins free of dust or dirtέ Dust or dirt adhering to the ins will
cause piston seizureέ
REPLACEMENT OF GASKETS AND PACKINGS
Replace gaskets and packings if the engine is disassembledέ
Any maintenance or adjustment work that is not included and described in this manual is only to be performed by Authorized Service Agentsέ
Downloaded from
www.Manualslib.com
manuals search engine
βθ
(3)
(2)
(1)
(1)
(1)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis