Hendi 281369 Gebrauchsanweisung Seite 9

1) Open the door and press number button '1'
for 5 seconds, display will show 'PROGRAM'
for item 281369, 281413 or ProG for item
281444.
2) Press number button '3', display shows P:03
for item no.: 281369, 281413 only. After 2
seconds the display will show the time relat-
ed with the program ':30'.
3) Press the number buttons '1' '2' '5' to set the
cooking time.
4) Press for the power level. The display will
show '1:25 70' for item 281369, 281413 only.
Double quantity (X2)
This microwave is equipped with a function
to calculate the amount of time needed when
preparing a double quantity of food. Press the
'X2' button followed by the program and the
Multi stage cooking Mode
This function allows the user to cook the food
under different combination of power levels by
"Manual Entry mode or Programming mode.
The maximum number of stages is 3. To use
this function first follow the steps under 'Man-
ual entry'. After setting the time and power of
the first stage press '
shows 'STAGE-2' for item no. 281369, 281413
or S-2 for 281444 only, now input the desired
time and power. If a third stage is needed,
press 'time entry' once more, the display will
show 'STAGE-3' for item no. 281369, 281413
or S-3 for 281444 only, and input the desired
time and power. Now press the ' ' button to
start the microwave. Multi stage input is set in
a same manner while in programming mode.
Bellow an example of how this could work:
1) Open the door, then press and hold number
"1" on the number keyboard for 4 ~ 6 sec-
onds, display will show 'PROGRAM' for item
no. 281369, 281413 or ProG for item no.:
281444.
2) Press number button '3', display shows P:03
for item no.: 281369, 281413 only. After 2
seconds the display will show the time relat-
ed with the program (standard ':30').
' again, the display
5) Press the ' ' button for item no. 281369,
281413 only. The program is now saved un-
der number keyboard '3'.
To overwrite the program repeat the steps
above.
Note: Total programming time is limited to 60
minutes only.
Note: When the cooking time exceeds the max-
imum time the microwave can operate (stand-
ard 60 minutes) three beeps will be sound. This
means you need to adjust the time before the
program can work.
Note: See also = = > Return to factory settings.
microwave will increase the time you preset
and start the process. This function can only
be used in combination with a preset program
mode.
3) Press the number buttons '1' '2' '5' to set the
cooking time.
4) Press for the power level of stage 1.
The display will show '1:25 70' for item no.:
281369, 281413 only.
5) To set the second stage press 'time entry'
button, the display will show 'STAGE-2' for
item no. 281369, 281413 or S-2 for 281444
only.
6) Press the number buttons '3' '3' '0' to input
the time.
7) Press for the power of stage 2. The dis-
play will show '3:30 50' for item no.: 281369,
281413 only.
8) Press the 'start' button. The multi stage pro-
gram is now saved under button '3'.
Note: Total cooking time is limited to 60 min-
utes only.
Note: When multi stage cooking is active the
microwave shows the total time remaining of
all stages.
Note: See also = = > Return to factory settings
EN
9