Hendi 281369 Gebrauchsanweisung Seite 13

How to remove and re-install the splash shield (Only for item no. 281369)
Warning: before removing or installing the shield make sure the microwave is unplugged from the
power outlet and that the microwave is cool.
Removing the splash shield
1) Use 2 thumbs to press the indicated locks of
the splash shield.
2) The lock is released and you can remove the
splash shield.
3) Wash the splash shield with lukewarm water and
mild detergent.
thumb pressed here
Re-installing the splash shield:
1) Align the 3 pins at the back of the splash shield
with the 3 holes at the back of the microwave.
2) Push the 3 pins into the holes and use both hands
to push splash shield into place until you hear it
locking into place.
thumb pressed here
13
EN