Hendi 281369 Gebrauchsanweisung Seite 10

Return to factory settings
To return the microwave back to the factory
settings press and hold the ' ' and '0' button
together until the buzzer sounds, the display
will show 'CHECK' for item 281369, 281413
and 00 for item 281444. Then, press ' ' for
item 281444. When the microwave restored the
User options
This microwave allows the user to change
some options. To change first start by opening
the door and press '2' for 5 seconds, the display
will show 'OP:--'. Press the number button re-
lated with what needs to be changed, for ex-
ample '2'. Now the display shows 'OP:22', keep
pressing '2' until the desired setting is displayd
'OP:20'/'OP:21'/'OP:22' (it cycles trough these
Option
1 EOC Tone
EN
2 Beeper Volume
3 Beeper On/Off
4 Keyboard Window
5 On the Fly
6 Door Reset
7 Max time
8 Manual Programming
9 Double Digit
10
factory settings the display will show '11'. If
returning to the factory settings failed the dis-
play will show '00', press ' ' button and the
display will now show 'CLEAR' and the buzzer
will sound once.
options). To set the desired setting press 'start'.
Now the change is saved. During changing the
options you can cancel this by pressing 'pause'.
The change won't be saved and the microwave
will return to 'door open mode'. Bellow an list
of the options that can be changes, bold print-
ed items are the preset options.
Setting Description
OP:10 3 seconds beep
OP:11 Continuous beep
OP:12 5 quick beeps, repeating
OP:20 Beeper Off
OP:21 Low
OP:22 Medium
OP:23 High
OP:30 Key beep Off
OP:31 Key beep On
OP:40 15 seconds
OP:41 30 seconds
OP:42 60 seconds
OP:43 120 seconds
OP:50 On-the-Fly Disable
OP:51 On-the-Fly Enable
OP:60 Door reset Disable
OP:61 Door Reset Enable
OP:70 60 Minute Maximum Cook Time
OP:71 10 Minute Maximum Cook Time
OP:80 Manual Programming Disable
OP:81 Manual Programming Enable
OP:90 Single Digit Mode (10 programs)
OP:91 Double Digit Mode (99 programs)