Working With The Citrus Press Attachment - Silvercrest IAN 282016 Bedienungsanleitung

If ingredients stick to the sides of the blender during processing:
–
Switch the appliance off.
–
Remove the plug from the mains power socket.
–
Open the lid
dough scraper
–
Close the lid
CAUTION - PROPERTY DAMAGE!
► Never open the lid
could spray out!
► If you are mixing an easily foaming liquid such as milk, put no more than 1
litre into the blender so that it does not overflow.
NOTE
► If you wish to add liquid whilst the mixer is operating remove the closure
and pour the fluid into the opening in the lid
► When mixing hard ingredients such as ice cubes, use setting "P" (Pulse)
several times.
► Do not prepare large quantities all at once, but in several portions.
► If you are dissatisfied with the results, switch the appliance off and remove
the plug from the mains power socket. Stir the ingredients using the dough
scraper
again.

Working with the citrus press attachment

You can use the citrus press attachment to squeeze citrus fruit such as oranges
and lemons.
1) Assemble the citrus press attachment as described in the section "Assembly".
2) Cut the fruit in half.
3) Start by turning the speed control
4) Press the fruit onto the juice squeezer
juice collects in the mixing bowl
pulp sieve
SKM 500 B2
and remove the ingredients from the inside using the
.
and re-connect the appliance to the power supply.
of the blender whilst the knife is still rotating! Food
or remove some of them. Add some liquid if necessary and mix
.
.
of the appliance to setting 1.
so that the juice is pressed out. The
while the fruit pulp is caught in the fruit
│ 89 ■
GB